Journal Articles

  1. Grasso, G., Snyder K., Poettgen, B. K. and Cetegen, B. M., “Heat Transfer Characterization of Effusion Jet Cooled Panels Exposed to Combustion Environment using Infrared Thermography,” to be submitted to International Journal of Heat and Mass Transfer, 2021

 

  1. Grasso, G., Snyder K. and Cetegen, B. M., “Application of Planar Rayleigh Scattering for Measurement of Gas Temperature Distributions in Effusion Jet Cooled Panels Exposed to High Temperatures,” submitted to ASME Journal of Heat Transfer, 2021

 

  1. Roy Chowdhury, B. and Cetegen, B. M., “Experiments on the combined effects of free stream flow turbulence and fuel type on blowoff characteristics of bluff body stabilized premixed flames,” to be submitted for publication in Combustion and Flame, 2020

 

  1. Dayton, J. W., Poettgen, B. K., and Cetegen, B. M., “Non-isothermal mixing characteristics in the extreme near-field of turbulent jets in hot crossflow: Effects of jet exit turbulence and velocity profile,” Physics of Fluids, Vol. 32, Issue 11, 2020,https://doi.org/10.1063/5.0026860

 

  1. Roy, R. and Cetegen B. M., “Dynamics of 2D, V-shaped bluff-body stabilized turbulent premixed flames near and away from blowoff with different gaseous fuels,” Combustion Science and Technology, 2020, https://doi.org/10.1080/00102202.2020.1726330

 

  1. Dayton, J. W., Poettgen, B. K., Linevitch Jr., K. and Cetegen, B. M., “Non-isothermal mixing characteristics of a turbulent jet in a hot crossflow,” Physics of Fluids, Vol. 31, pp. 125104:1-17, 2019

 

  1. Wu, B., Zhao, X., Roy Chowdhury, B. Cetegen, B. M., Xu, C, and Lu, T., “A numerical investigation of the flame structure and blowoff characteristics of a bluff-body stabilized turbulent premixed flame,” Combustion and Flame, Vol. 202, pp. 376-393, 2019

 

  1. Basu, S., Chaudhuri, S., Cetegen, B. M. and Saha, A., “Mixing Dynamics in Interacting Vortices,” pp. 317-344, Energy for Propulsion: A Sustainable Technologies Approach, Editors: A. K. Runchal, A. K. Gupta, A. Kushari, A. De and S. K. Aggarwal, Springer, 2018

 

  1. Dayton, J., Linewitch, K. Jr. and Cetegen, B. M., “Ignition and flame stabilization of a pemixed reacting jet in vitiated crossflow,” Proceedings of the Combustion Institute, Vol. 37, pp. 2417-2424, 2019

 

  1. Roy Chowdhury, B. and Cetegen, B. M., “Effects of fuel properties and free stream turbulence on characteristics of bluff-body stabilized flames,” Combustion and Flame, Vol. 194, pp. 206-222, 2018

 

  1. Roy Chowdhury, B. and Cetegen, B. M., “Effects of free stream flow turbulence on blowoff characteristics of bluff-body stabilized premixed flames,” Combustion and Flame, Vol. 190, pp. 302-316, 2018

 

  1. Roy Chowdhury, B. and Cetegen, B. M., “Experimental study of the effects of free stream turbulence on characteristics and flame structure of bluff body stabilized conical flames,” Combustion and Flame, Vol. 178, pp. 311-328, 2017,

 

  1. Wagner, J. A., Renfro, M. W. and Cetegen, B. M., “Premixed jet flame behavior in a hot vitiated crossflow of lean combustion products,” Combustion and Flame, Vol. 176, pp. 521-533, December 2016, http://dx.doi.org/10.1016/j.combustflame.2016.11.014

 

  1. Roy Chowdhury, B., Wagner, J. A. and Cetegen, B. M., “Experimental study of the effect of turbulence on the structure and dynamics of a bluff-body stabilized lean premixed flame,” Proceedings of the Combustion Institute, Vol. 36, pp. 1853-1859, 2017, http://dx.doi.org/10.1016/j.proci.2016.07.125

 

  1. Wagner, J., Grib, S., Dayton J., Renfro, M. W. and Cetegen, B. M., “Flame stabilization analysis of a premixed reacting jet in vitiated crossflow,” Proceedings of the Combustion Institute, Vol. 36, pp. 3763-3771, 2017, http://dx.doi.org/10.1016/j.proci.2016.07.020

 

  1. Emerson, B, Jagtap, S., Quinlan, J. M., Renfro, M. W., Cetegen, B. M., Lieuwen, T., “Stability Analysis of Reacting Wakes: Flow and Density Asymmetry Effects”, Physics of Fluids, Vol. 28, 045101 (2016); http://dx.doi.org/10.1063/1.4943238

 

  1. Wagner, J. A., Grib, S. W., Renfro, M. W. and Cetegen, B. M., “Flowfield measurements and flame stabilization of a premixed reacting jet in vitiated crossflow,” Combustion and Flame, Vol. 162, pp. 3711-3727, 2015

 

  1. Nordeen, C. A., Schwer, D., Schauer, F., Hoke, J., Barber, T. and Cetegen, B. M., ”Role of Inlet Reactant Mixedness on the Thermodynamic Performance of a Rotating Detonation Engine,” Shock Waves, Vol. 25, No. 3, pp. 1-12, May 2015

 

  1. Nordeen, C. A., Schwer, D., Schauer, F., Hoke, J., Barber, T. and Cetegen, B. M., “Rothalpy Analysis of a Rotating Detonation Engine,” Combustion, Explosion and Shock Waves, Vol. 50, No. 5, pp. 568-577, 2014

 

  1. Biswas, S., Kopp-Vaughan, K. M., Renfro, M. W. and Cetegen, B. M., “Phase-resolved Characterization of Forced Conical Premixed Flames Near and Far from Blowoff,” Combustion and Flame, Vol. 160, pp.2843-2855, 2013

 

  1. Tuttle, S. G., Chaudhuri S., Kopp-Vaughan, K. M., Jensen, T., Cetegen, B. M., Renfro, M. W., and Cohen, J., “Lean blowoff behavior of asymmetrically fueled bluff-body stabilized flames,” Combustion and Flame, Vol. 160, No. 9, pp. 1677-1692, 2013

 

  1. Kopp-Vaughan, Jensen, T. R., Cetegen, B. M. and Renfro M. W., “Analysis of the Blowoff Dynamics from Flames with Stratified Fueling,” Proceedings of the Combustion Institute, Vol. 34, pp. 1491-1498, 2013

 

  1. Tuttle, S. G., Chaudhuri S., Kostka S., Kopp-Vaughan, K. M., Jensen, T., Cetegen, B. M. and Renfro, M. W., “Time-resolved blowoff transition measurements for two dimensional bluff-body stabilized flames in vitiated flow,” Combustion and Flame, Vol. 159, No.1, pp. 291-305, 2012

 

  1. Chaudhuri S., Kostka S., Renfro, M. W. and Cetegen, B. M., “Blowoff mechanism of harmonically forced bluff-body stabilized turbulent premixed flames,” Combustion and Flame, 2011, Vol. 159, No. 2, pp. 638-640, 2012

 

  1. Saha, K. and Cetegen, B. M., “Modeling of precipitate formation in solution precursor droplets in a microwave plasma,” Journal of Thermal Spray Technology, Vol. 21, No. 2, pp.211- 225, March 2012, DOI: 10.1007/s11666-011-9712-3

 

  1. Quinn, G. and Cetegen, B. M., “Heat transfer in an evaporating liquid film flowing over a rotating disk,” Experimental Heat Transfer, Vol. 24, pp. 88-107, 2011

 

  1. Saha, K., Chaudhuri, S. and Cetegen, B. M., “Modeling of ceramic particle heating and melting in a microwave excited plasma,” ASME Journal of Heat Transfer, Vol. 133, pp. 031002-1-10, March 2011

 

  1. Chaudhuri, S., Kostka, S., Tuttle, S. G., Renfro, M. W. and Cetegen, B. M., “Blowoff mechanism of two dimensional bluff-body stabilized turbulent premixed flames in a prototypical rig,” Combustion and Flame, Vol. 158, pp. 1358-1371, 2011

 

  1. Sur, R., Boucher, T. J., Renfro, M. R. and Cetegen, B. M., “Technique of laser calibration for wavelength modulation spectroscopy with application to proton exchange membrane fuel cell measurements,” Applied Optics, Vol. 49, No. 2, pp. 1-11, 2010

 

  1. Sur, R., Boucher, T. J., Renfro, M. R. and Cetegen, B. M., “In-situ measurements of water vapor partial pressure and temperature dynamics in a PEM fuel cell,” Journal of Electrochemical Society, Vol. 157(1), pp. B45-B53, 2010

 

  1. Chaudhuri, S., Kostka, S, Renfro, M. W. and Cetegen, B. M., “Blowoff dynamics of bluff body stabilized turbulent premixed flames,” Combustion and Flame, Vol. 157, pp. 790-802, 2010

 

  1. Quinn, G. and Cetegen, B. M., “Effect of surfactant addition on boiling heat transfer in a liquid film flowing in a diverging open channel,” Int’l Journal of Heat and Mass Transfer, Vol. 53, pp. 245-253, 2010

 

  1. Quinn, G. and Cetegen, B. M., “Investigation of heat transfer and bubble dynamics in a boiling thin liquid film flowing over a rotating disk,” Int’l Journal of Thermal Science, Vol. 49, pp. 643-652, 2010

 

  1. Cetegen, B. M. and Basu, S., “Review of modeling of liquid precursor droplets and particles injected into plasmas and high velocity oxy-fuel (HVOF) flame jets for thermal spray applications,” Journal of Thermal Spray Technology, Vol. 18, No. 5-6, pp. 769-793, December 2009, DOI: 10.1007/s11666-009-9365-7

 

  1. Chaudhuri, S., Mukhopadhyay A., Biswas, M. S., Cetegen, B. M. and Basu, S.,  “Control of combustion in a thermally stabilized burner,” ASME Journal of Power and Energy, Vol. 223(A2), pp. 127-139, 2009, DOI:  10.1243/09576509JPE680

 

  1. Chaudhuri, S. and Cetegen B. M., “Blowoff characteristics of bluff-body anchored premixed flames in a duct with upstream spatial mixture gradients and velocity oscillations,“ Combustion Science and Technology, Vol. 181, pp. 555-569, 2009

 

  1. Chaudhuri, S. and Cetegen B. M., “Transfer function characteristics of bluff-body stabilized conical premixed flames in the presence of upstream spatial mixture gradients,“ Combustion and Flame, Vol. 156, pp. 706-720, 2009

 

  1. Saha, A., Seal, A, Cetegen, B., Jordan, E., Ozturk, A. and Basu, S., “Thermo-physical processes in cerium nitrate precursor droplets injected into high temperature plasma,” Surface Coatings and Technology, Vol. 203, No. 15, pp. 2081-2091, 2009

 

  1. Basu, S. and Cetegen, B. M., “Processing of liquid ceramic precursor droplets in a High Velocity Oxy-fuel (HVOF) flame jet,” Acta Materialia, Vol. 49, No. 12, pp. 2750-2759, 2008

 

  1. Chaudhuri, S. and Cetegen, B. M., “Blowoff characteristics of bluff-body stabilized premixed flames with upstream composition gradients and flow oscillations,” Combustion and Flame, Vol. 153, No. 4, pp. 616-633, 2008

 

  1. Basu, S. and Cetegen B. M., “Modeling of ceramic formation in liquid precursor droplets heated by laser irradiation,” ASME J. Heat Transfer, Vol. 130, pp. 071501-071509, 2008

 

  1. Gell, M., Jordan, E. H., Cetegen, B. M., Padture, N., Xie, L and Teicholz, M., “Thermal barrier coatings made by solution precursor spray process,” Journal of Thermal Spray Technology, Vol. 17, No. 1 pp. 124-135, 2007

 

  1. Basu, S., Jordan, E. H. and Cetegen, B. M., “Fluid Mechanics and heat transfer of liquid precursor droplets injected into high temperature plasmas,” Journal of Thermal Spray Technology, Vol. 17, No. 1 pp. 60-72, 2007

 

  1. Basu, S., Barber, T. J. and Cetegen, B. M., “Computational study of scalar mixing in the field of a gaseous line vortex,” Physics of Fluids, Vol. 19, No. 5, pp. 053601 – 053614, 2007

 

  1. Basu, S. and Cetegen, B. M., “Modeling of thermo-physical processes in liquid ceramic precursor droplets injected into a plasma jet,” Int’l Journal of Heat and Mass Transfer, Vol. 50, pp. 3278 – 3290, 2007

 

  1. Basu, S., Renfro, M. W. and Cetegen, B. M., “Spatially-resolved optical measurements of water partial pressure and temperature in a PEM fuel cell under dynamic operating conditions,” Journal of Power Sources, Vol. 162, pp. 286-293, 2006

 

  1. Basu, S. and Cetegen, B. M., “Effect of hydraulic jump on hydrodynamics and heat transfer in a thin liquid film flowing over a rotating disk analyzed by integral method,” ASME J. Heat Transfer, Vol. 129, pp. 1-7, May 2007

 

  1. Basu, S. and Cetegen, B. M., “Soot topography in a planar diffusion flame wrapped in a line vortex,” Combustion and Flame, Vol. 146, No. 4 pp. 687-697, 2006.

 

  1. Basu, S., Renfro, M. W., Gorgun, H. and Cetegen, B. M., “In-situ simultaneous measurements of temperature and water partial pressure in a PEM fuel cell under steady state and dynamic cycling,” Journal of Power Sources, Vol. 159, pp. 987-994, 2006.

 

  1. Ozturk, A. and Cetegen B. M., “Modeling of axial injection of ceramic precursor droplets into an oxy-acetylene flame environment,” Material Science and Engineering A, Vol. 422/1-2 pp 163-175, April 2006

 

  1. Xie, L., Chen, D., Ozturk, A., Wu, F., Ma, X., Jordan, E. H., Padture, N.P., Cetegen, B.M. and Gell, M., “Formation of Vertical Cracks in Solution-Precursor Plasma-Sprayed Thermal Barrier Coatings, “Surface and Coatings Technology, Vol. 201, No. 3-4, pp. 1058-1064, 2006

 

  1. Chaparro, A., Landry, E. and Cetegen, B. M., “Transfer function characteristics of bluff-body stabilized conical V-shaped turbulent premixed flames Combustion and Flame, Vol. 145, pp. 290-299, 2006

 

  1. Cetegen, B. M., “Scalar Mixing in the Field of a Gaseous Laminar Line Vortex” Experiments in Fluids, Vol. 40, pp. 967-976, 2006

 

  1. Basu, S. and Cetegen, B. M., “Analysis of hydrodynamics and heat transfer in a thin liquid film flowing over a rotating disk by integral method, ASME J. Heat Transfer, Vol. 128, pp. 217-225, 2006

 

  1. Chaparro, A. and Cetegen, B. M., “Blow-off characteristics of bluff-body stabilized conical premixed flames under upstream velocity modulation,” Combustion and Flame Vol. 144, pp. 318-335, 2006

 

  1. Ozturk, A. and Cetegen B. M., “Experiments on ceramic formation from liquid precursor spray axially injected into an oxy-acetylene flame,” Acta Materialia, Vol. 53, pp. 5203 – 5211, 2005

 

  1. Ozturk, A. and Cetegen B. M., “Modeling of axially and transversely injected precursor droplets into a plasma environment,” Int’l Journal of Heat and Mass Transfer, Vol. 48, No. 21-22, pp. 4367-4383, 2005

 

  1. Basu, S., Xu, H., Renfro, M. W. and Cetegen, B. M., “In situ optical diagnostics for measurements of water vapor concentration in a PEM fuel cell,” ASME Journal of Fuel Cell Science and Technology, Vol. 3, pp. 1 – 7, 2006

 

  1. Rice, J., Faghri, A., Cetegen, B. M., “Analysis of a free surface film from a controlled liquid impingement jet over a rotating disk including conjugate effects with and without evaporation,” Int’l Journal of Heat and Mass Transfer, Vol. 48, pp. 5192-5204, 2005

 

  1. Ozturk, A. and Cetegen, B. M., “Morphology of ceramic particulates formed in a premixed oxygen/acetylene flame from mono-size liquid precursor droplets,” Acta Materialia, Vol. 53, pp. 2531-2544, 2005

 

  1. Ata, A., Cowart, J. S.,Vranos, A. and Cetegen, B. M., Effects of D.C. electric field on the blow-off characteristics of bluff-body stabilized conical premixed flames,” Combustion Science & Technology, Vol. 177, No. 7, pp. 1291-1304, July 2005

 

  1. Ozturk, A. and Cetegen, B. M., “Modeling of plasma assisted formation of ytrria stabilized zirconia from liquid precursors,” Materials Science and Engineering A, Vol. 384, pp. 331-351, 2004

 

  1. Jordan, E. H., Xie, L., Ma, X., Gell, M., Padture, N. P., Cetegen, B. M., Ozturk, A., Roth, J., Xiao, T. D., Bryant, P. E., “Superior thermal barrier coatings using solution precursor plasma spray,” Journal of Thermal Spray Technology, Vol. 13(1), pp. 57-65, March 2004

 

  1. Ozar, B., Cetegen, B. M. and Faghri, A., “Experiments on heat transfer in a thin liquid film flowing over a rotating disk,” ASME Journal of Heat Transfer, Vol. 126, pp. 184 – 192, April 2004

 

  1. Xie, L., Ma, X., Ozturk, A., Jordan, E. H., Padture, N., Cetegen, B. M., Xiao, T. D. and Gell, M., “Processing parameter effects on solution plasma spray process spray patterns,” Surface and Coatings Technology, Vol. 183, No. 1, p. 51-61, 2004

 

  1. Zhang, Y. D., Ma, X. Q., Hui, S., Wu, M., Ge, S. H., Hines, W. A., Budnick, J. I. Cetegen, B. M. and Semenov, S. Y., “Structure and magnetic properties of NIFe/SiO2 and Co/SiO2 nano-composites consolidated by detonation compaction,” Journal of Applied Physics, Vol. 93, No. 10, pp. 6969 – 6971, May 2003

 

  1. Cetegen, B. M., Semenov, S. Y. and Goberman, D., “Deposition of multi-layered, nano-structured alumina-titania coatings by detonation waves,” Scripta Materialia, Vol. 48, No. 10, pp. 1483-1488, 2003

 

  1. Ozar, B., Faghri A. and Cetegen, B. M., “Experiments on the flow of a thin liquid film over a horizontal stationary and rotating disk surface,” Experiments in Fluids, Vol. 34, pp. 556-565, 2003

 

  1. Bhatia, T., Ozturk, A., Xie, L., Jordan, E., Cetegen, B. M., Gell, M., Ma, X., Padture, N., “Mechanisms of Ceramic Coating Deposition in Solution-Precursor Plasma Spray,” Journal of Materials Research, Vol. 17, No. 9, pp. 2363 – 2372, 2002

 

  1. Semenov, S. Y. and Cetegen, B. M., “Experiments and modeling of the deposition of nano-structured alumina-titania coatings by detonation waves,” Materials Science and Engineering A, Vol. 335/1-2, pp. 69-82, 2002

 

  1. Soteriou, M. C., Dong, Y. and Cetegen, B. M., “Lagrangian simulation of the unsteady near field dynamics of planar buoyant plumes,” Physics of Fluids, Vol. 14, No. 9, pp. 3118-3140, 2002

 

  1. Padture, N. P., Schlichting, K. W., Bhatia, T., Ozturk, A., Cetegen, B. M., Jordan, E. H., and Gell, M., “Towards Durable Thermal Barrier Coatings with Novel Microstructures Deposited by Solution-Precursor Plasma Spray,” Acta Materialia, Vol. 49, pp. 2251 – 2257, 2001

 

  1. Semenov, S. Y. and Cetegen, B. M., “Spectroscopic temperature measurements in DC-arc plasma jets utilized in thermal spray processing of materials,” Journal of Thermal Spray Technology, Vol. 10 (2), pp. 326-336, 2001

 

  1. Cetegen, B. M., Crary, F. L. and Dabora, E. K., “The interaction of periodically generated cylindrical detonations in a simulated hypersonic flow,” Proceedings of the Combustion Institute, Vol. 28, pp. 629-636, 2000

 

  1. Hermanson, J. C. and Cetegen, B. M., “Shock-induced mixing of non-homogeneous density turbulent jets,” Physics of Fluids, Vol. 12, No.5, pp. 1210-1225, 2000

 

  1. Cetegen, B. M. and Dong, Y., “Experiments on instability modes of buoyant diffusion flames and effects of ambient atmosphere on instabilities,” Experiments in Fluids, Vol. 28, No. 6, pp. 546-558, 2000

 

  1. Cetegen, B. M., “Integral analysis of planar and axisymmetric steady laminar buoyant diffusion flames,” Combustion Theory and Modeling, Vol. 3, pp.13-32, 1999

 

  1. Cetegen, B. M. and W. Yu, “Simultaneous particle temperature, velocity and size measurements in HVOF Thermal Sprays,” Journal of Thermal Spray Technology, Vol. 8 (1), pp. 57 -67, March 1999

 

  1. Hermanson, J. C. and Cetegen, B. M., “Mixing augmentation during interaction of weak shock waves with non-homogeneous turbulent jets,” Proceedings of the Combustion Institute, Vol. 27, pp. 2047-205, 1998

 

  1. Cetegen, B. M., “A phenomenological model for near-field fire plume entrainment,” Fire Safety Journal, Vol. 31, pp. 299 – 312, 1998

 

  1. Cetegen, B. M., Dong, Y., and Soteriou, M. C., “Experiments on stability and oscillatory behavior of planar buoyant plumes,” Physics of Fluids, Vol. 10, No. 7, pp. 1658 – 1665, 1998

 

  1. Tageldin, M. S. and Cetegen, B. M., “Development of mixing and dispersion in a droplet-laden, confined mixing layer,” Combustion Science and Technology, Vol.130: 1-6, pp. 131 – 169, 1998

 

  1. Cetegen, B. M., “Behavior of naturally oscillating and periodically forced axisymmetric buoyant plumes of helium and helium-air mixtures,” Physics of Fluids, Vol. 9. No. 12 , pp. 3742-3753, 1997

 

  1. Cetegen, B. M., “Measurements of instantaneous velocity field of a non-reacting pulsating buoyant plume by particle image velocimetry,” Combustion Science and Technology, Vol. 123,:1-6, pp. 377 – 387, 1997

 

  1. Cetegen, B. M. and Kasper, K. D., “Experiments on the oscillatory behavior of buoyant plumes of helium and helium/air mixtures,” Physics of Fluids, Vol. 8 (11), pp. 2974-2984, 1996

 

  1. Alessandri, D. S. and Cetegen, B. M., “Experiments on mixing enhancement in nonhomogeneous axisymmetric jets swept by weak shock waves,” Shock Waves @ Marseille IV, Editors: R. Brun and L. Z. Dumitrescu, pp. 331- 336 Springer-Verlag, 1995

 

  1. Cetegen, B. M. and Hermanson, J. C., “Mixing Characteristics of compressible vortex rings interacting with normal shock waves”, Combustion and Flame, Vol 100, pp. 232-240, 1995

 

  1. Cetegen, B. M. and Ahmed, T., “Experiments on the periodic instability of buoyant plumes and pool fires,” Combustion and Flame, Vol.93, pp.157-184, 1993

 

  1. Cetegen, B. M. and Mohamad, N., “Experiments on liquid mixing and reaction in a vortex,” Journal of Fluid Mechanics, Vol. 249, pp. 391 – 414, 1993

 

  1. Ghoniem, A. F., Soteriou, M. C., Knio, O. M., and Cetegen, B. M., “Effect of steady and periodic strain on unsteady flamelet combustion,” Proceedings of the Combustion Institute, Vol. 24, pp. 223-230, 1992

 

  1. Cetegen, B. M. and Pines, D. S., “Combustion of a stretched carbon monoxide ligament with radiative heat losses,” Combustion and Flame, Vol: 91, pp. 143-152, 1992

 

  1. Cetegen, B. M. and Bogue, D. R., “Combustion in a stretched fuel strip with finite rate chemistry,” Combustion and Flame, Vol: 86, pp. 359 – 370, 1991

 

  1. Cetegen, B. M. and Aguirre, J. P., “Analysis of molecular mixing and chemical reaction in a vortex Pair,” Physics of Fluids A, Vol. 2, No. 11, pp. 2211 – 2216, December 1990

 

  1. Cetegen, B. M. and Sirignano, W. A., “Study of mixing and reaction in the field of a vortex,” Combustion Science and Technology, Vol. 72, pp. 157-181, 1990

 

  1. Cetegen, B. M. and Sirignano, W. A., “Study of molecular mixing and a finite rate chemical reaction in a mixing layer,” Proceedings of the Combustion Institute, Vol. 22, pp. 489-494, 1988

 

  1. Cetegen, B. M., Zukoski, E. E. and Kubota, T., “Entrainment in the near field of fire plumes,” Combustion Science and Technology, Vol: 39, pp. 305-331, 1985

 

  1. Zukoski, E. E., Cetegen, B. M. and Kubota, T, “Visible structure of buoyant diffusion flames,” Proceedings of the Combustion Institute, Vol. 20, pp. 361-366, 1984

 

  1. Zukoski, E. E., Kubota, T. and Cetegen, B. M., “Entrainment in fire plumes,” Fire Safety Journal, Vol. 3, pp. 107 – 121, 1980/81

 

  1. Cetegen, B. M., Teichman, K. Y., Weinberg, F. J. and Oppenheim, A. K., “Performance of a plasma jet igniter,” Paper 800042, SAE Transactions, Detroit, Michigan, 1980